Amazing machines videos

Amazing machines videos DEFAULT

Video: ✅ Amazing Machines &#; Watercrafts that you will not believe Exist

Amazing Machines & Watercrafts that you will not believe exist

Massage Me For Any Issue:

Facebook Page:- MESSEGE ME




AirFish 8
WhiteWater Crafts
Glider SS18
Malloy HoverBike
&#;Boka Vanguard
Royalmac H32


Top 10 Amazing Machines from Around the World

amazing machines game

Plasser & Theurer SVM track laying train, can lay up to 2km of track in 24 hours which is semi-automated and is being used world wide to lay train lines which much lesser efforts and faster turnaround time.


interesting machines video

A tunnel boring machine (TBM), also known as a "mole", is a machine used to excavate tunnels with a circular cross section through a variety of soil and rock strata. They may also be used for micro tunneling. They can bore through anything from hard rock to sand. Tunnel diameters can range from a metre (done with micro-TBMs) to metres to date. Tunnels of less than a metre or so in diameter are typically done using trenchless construction methods or horizontal directional drilling rather than TBMs.

Tunnel boring machines are used as an alternative to drilling and blasting (D&B) methods in rock and conventional "hand mining" in soil. TBMs have the advantages of limiting the disturbance to the surrounding ground and producing a smooth tunnel wall. This significantly reduces the cost of lining the tunnel, and makes them suitable to use in heavily urbanized areas. The major disadvantage is the upfront cost. TBMs are expensive to construct, and can be difficult to transport. The longer the tunnel, the less the relative cost of tunnel boring machines versus drill and blast methods. This is because tunneling with TBMs is much more efficient and results in shortened completion times, assuming they operate successfully.


 japanese incredible machine

Bridge inspection units have been successfully used on a large number of railway vehicles, 2-way vehicles and road vehicles for many years. They stand out by virtue of a particularly large operating range both above and below track level. Equipped with electrical, hydraulic and pneu-matic energy in the workman baskets, these units can also be used for taking material samples and for carrying out light repair work.


 japanese incredible machine

Newer street sweepers are capable of collecting small particles of debris.Many street sweepers produced today are PM10 certified, meaning that they are capable of collecting and holding particulate matter sized less than 10μm. Despite advancements in street sweeping technology, the mechanical broom type street sweeper accounts for approximately 90 percent of all street sweepers used in the United States today.

Modern street sweepers are equipped with water tanks and sprayers used to loosen particles and reduce dust. The brooms gather debris into a main collection area from which it is vacuumed and pumped into a collection bin or hopper.

Road Zipper

amazing machines tv show

A barrier transfer machine, also known as zipper machine or road zipper, is a heavy vehicle used to transfer concrete lane dividers, such as jersey barriers, which are used to relieve traffic congestion during rush hours. Many other cities use them temporarily during construction work. The lanes created by the machine are sometimes referred to as "zipper lanes".

One advantage of barrier systems over other lane management treatments (i.e. traffic cones or overhead directional lights) is that a solid, positive barrier prevents vehicle collisions due to motorists crossing over into opposing traffic flow. A disadvantage is that lane widths can be slightly reduced.

amazing machines tv show

Airport crash tenders are extremely powerful and one of the most awesome machines. They offer relatively good acceleration (for such large, heavy vehicles), are able to negotiate rough terrain outside the airport area, carry large capacities of water and firefighting foam, are fitted with powerful high-capacity pumps and water/foam cannons, and are capable of delivering firefighting media over long distances. They can be mounted on 4x4, 6x6 or even 8x8 wheeled chassis. In order to decrease their turning radius, the 8x8 wheeled unit may have all 4 wheels at the front of the vehicle involved in turning the truck.

Newer airport crash tenders also incorporate twin agent nozzles/injection systems to inject a stream of Purple-K dry chemical into the AFFF foam stream "knocking-down" the fire faster. Some also have Halotron tanks with handlines for situations that require a clean agent to be utilized. These features give the airport crash tenders a capability to reach an airplane rapidly, and rapidly put out large fires with jet fuel involved.

Some tenders have an elevated extended extinguishing arm, giving a possibility to raise a water/foam cannon into the height of approx. 10 – 20 meters, that can puncture through superficial structures of an aeroplane to fight a fire inside the fuselage.

Some arms have reinforced nozzles, called a snozzle, that, according to the US National Transportation Safety Board is a "piercing nozzle on the fire truck that is used to penetrate an airplane's fuselage and dispense AFFF to extinguish fire inside the cabin or cargo area."
amazon airport
amazing machines in the world compilation

The Class DD14 is japanese incredible machine which was a B'B' wheel arrangement diesel-hydraulic locomotive type operated in Japan as a self-propelled rotary snowplough unit from to by the national railway company Japanese National Railways (JNR), and later by East Japan Railway Company (JR East). West Japan Railway Company (JR West), and Hokkaido Railway Company (JR Hokkaido).

Based on the earlier Class DD13 6th-batch locomotives, the Class DD14 was a single-end-cab design with a rotary snowplough unit at the cab end. It was the first diesel-powered rotary snowplough built by JNR. The locomotives had two hp ( kW) diesel engines. One engine could be used for propulsion with the other driving the rotary snowplough unit, giving a snow-clearing capacity of approximately 3, tonnes per hour, or the unit could be operated in multiple with a second locomotive allowing both engines to drive the rotary snowplough, giving a snow-clearing capacity of approximately 4, tonnes per hour.

most awesome machine

The Komatsu TX is designed from the ground up to be one of the most awesome machine and world’s most productive thinning machine. It possesses an unmatched combination of performance and maneuverability making it extremely effective while minimizing its impact in the forest. Lifting power Ground clearance Higher production at full reach comes from a new higher capacity crane capable of greater lift kNm lbf-ft (,). High ground clearance mm (25”) enhances mobility and helps reduce environmental impact. The new Komatsu Comfort Bogie ensures a smooth ride, superb maneuverability and improved climbing ability.

Also Read Other Interesting Civil Engineering Articles Here

  1. Lnp obituaries
  2. Hydra motor works
  3. Super mario digital invitation
  4. Superbook season 2 episode 2
  5. Naruto shippuden episode

07/25/ - Amazing Machines Intros AM
Voltage Controlled AHDSR for Reaktor Blocks


A 5 Stage Envelope Generator with Selectable Rate that goes up to a seconds per Stage. Sporting Analog and Digital Triggering Modes, Cycle Mode, Continuously Variable Envelope Curves and much more, AM makes the creation of sophisticated Envelope Curves a breeze.

09/30/ - Amazing Machines Intros AM
Ring Modulator for Reaktor Blocks


An advanced Ring Modulator, with features such as Dry / Wet Mix Control, Polarity Flip Switches and Continuously Variable X Axis Curves, AM takes Audio and CV Mangling to a whole new level.

08/22/ - Amazing Machines Intros AM
Quad VCA for Reaktor Blocks


A highly flexible Quad VCA. Sporting Continuously Variable VCA Curves that range from Exponential to Logarithmic and anything in between, AM can Link VCA 1 to VCA 2 and VCA 3 to VCA 4, allowing for complex Amplitude Modulation Paths such as Tremolo Effects, Overall Volume Control and Effect Sends.

04/05/ - Amazing Machines Intros AM
CV Mixer for Reaktor Blocks


An 8 Channel CV Mixer, optimized for use in conjunction with a DC Coupled Audio Interface to convert Reaktor Blocks Signals into Analog Control Voltages, allowing the interaction of Reaktor Blocks Modules with Hardware Synths and Modular Systems.

10/29/ - Amazing Machines Intros AM Quad Attenuverter & Offset Generator for Reaktor Blocks


Built to function as an Expander Module for other Amazing Machines' modules, AM can also be used as a Command Center for all Modulations within a Patch, taking care of Modulation Levels and Offsets, as well as individually Muting Modulation Sources.

10/25/ - Amazing Machines Intros AM Programmable Wavetable Oscillator for Reaktor Blocks


A Programmable Wavetable Oscillator, featuring a 16 Stages Wavetable with 3 selectable Playback Modes and 3 types of Output Curves, AM is a Shape Shifter yet to be rivalled.

10/03/ - Amazing Machines Intros AM Colorful Noise for Reaktor Blocks


A Noise Generator like no other, AM can do much more than a standard Noise Generator. Earth Shaking Noise Sweeps, Modulated Noise, Tuned Noise, Chiptune Style Noise and Random LFO Speed Noise are so easy to achieve with AM that you won’t believe your ears. AM also comes with a Builtin Output VCA, making the setup of complex patches fast and easy.

08/13/ - Amazing Machines Releases
WRECKER - Wave Folder for Reaktor


A Multi-function Effects Processor Ensemble for use with Native Instruments’ Reaktor. With focus on Wave Folding Effects, WRECKER also includes a Pulse Modulator, a State Variable Filter, a Pan Modulator and an Oscilloscope.

03/07/ - Volcano Kit Compatibility Announcement


We are proud to announce that our Volcano Kit is fully compatible with the KORG Volca Sample.


The MIDI Output Port on the Volca Sample transmits the following messages:


- Start / Stop Commands

- MIDI Clock

- Trigger Output from Part 1 to 10 (MIDI Channels 1 to 10)


Note: The current Volca Sample Firmware, version , doesn't allow the Volca Sample to transmit MIDI Continuous Controller Data from it's Knobs, this functionality may be added in a further Update.

11/15/ - Amazing Machines Releases Amazing PEQ-1 FREE - Parametric EQ and Preset Warmer


A straightforward Overall Tone Shaping tool, capable of drastically change an audio source with its 1 Band Mid-Range Equalizer and its Preset Warmer.


The Amazing PEQ-1 FREE is Free for anyone to download!

11/07/ - Amazing Machines Intros BRUTE VRS - Virtual Recall Sheet for the MINIBRUTE


A Virtual Recall Sheet for the Arturia MINIBRUTE, which allows users to digitally store patches made on the Hardware Synth.

Although the BRUTE VRS does not generate any sound on it’s own, special attention to detail has been taken to achieve visual feedback that is as close as possible to the hardware instrument, including the LEDs for Octave Selection, Envelopes, LFO and Arpeggiator Tempo.

The Pitch and Mod Wheels respond to incoming MIDI Data from the MINIBRUTE, while the Envelopes’ LEDs blink, in a similar fashion to the hardware, when notes are played and depending on how the Envelopes are set. The Arpeggiator Tempo can be Synced to a DAW’s Tempo using the Clock Source Switch. This level of detail may sound trivial at first, for a simple Virtual Recall Sheet, but it’s essential to allow the end user to store and load patches fast and easy.


05/22/ - Amazing Machines Releases the Amazing Scope Suite for Reaktor


A bundle of 3 unique Reaktor Ensembles that will change the way you see Waveforms in your DAW. With unparalleled features such as Freezed Waveform Navigation, Tempo Synced Triggering and MIDI Triggering, the Amazing Scope Suite brings the Oscilloscope to your DAW, an Essential Tool that has been available in Professional Studios for more than 40 years.

03/08/ - Amazing Machines Releases Volcano - MIDI Output Interface for the KORG Volca Series




- Custom-built Spacer for the MIDI Output Connector
- Factory Pre-assembled
- Turns any KORG Volca into a neat MIDI Sequencer and Controller
- Enables recording of Parameter Automation and MIDI Note Data directly from any KORG Volca to an External Sequencer or DAW for later playback




Compatible with the KORG Volca Bass, Volca Beats and Volca Keys.


Installation Requirements:


Basic soldering skills are required for installation, as simple as soldering 3 wires to the main PCB of your KORG Volca, as shown in the picture.



Any MIDITRIBE Revision will work % with the MONOTRIBE OS update. The update brings us a new feature:


- Muting a step in the internal sequencer now mutes the same step when a sequence is sent to the MIDI Output Port


MIDI has priority over CV, when a MIDI Note On message is received any incoming CV signal will be ignored.

05/12/ - Amazing Machines Releases NastyMono - Feedback Controller and I/O Adapter for the KORG Mono Series





- Stereo mm I/O cables
- Mono 1/4" Auxiliary Input
- Mono 1/4" Audio Output
- Feedback Attenuator for Optimal Control over the Feedback Path
- Fixed Passive Low Pass Filter to clean up the Feedback Path
- Passive Device, no batteries or PSU needed


The NastyMono was designed for the KORG Mono Series and will work properly with any of the following devices:

Original Monotron
Monotron Duo
Monotron Delay

You still can use the NastyMono with any other Analog Synth that features a VCF Input and Multiple Audio Outputs or a Separate Headphones Output. However due to the nature of the KORG Mono Series the 1/4” Auxiliary Input and the 1/4” Audio Output Signals on the NastyMono rely on the RING contacts found on the mm I/O cables, there for the 1/4” Auxiliary Input won’t work if your Synth features a Mono VCF Input, the same goes for the 1/4” Audio Output, if the NastyMono is being feed by a Mono Signal the 1/4” Audio Output won’t work. Despite the fact that the 1/4” connectors won’t work depending on your specific Analog Synth, the Feedback Knob will still work, giving you the desired Distortion Effect, a good example is the Moog Minitaur which will access all the NastyMono’s functionality except for the 1/4” Auxiliary Input.

04/12/ - Fabrizio Poce Releases MTribe - Editor and Control Surface for the Korg Monotribe


Netherlands-based developer Fabrizio Poce releases MTribe, an editor and control surface for the Korg Monotribe. Our MIDITRIBE I/O Interface was used by Fabrizio during the development, so the MTribe editor is % optimized for the MIDITRIBE I/O.

MTribe is available as standalone app for Mac and Windows as well as an Ableton Live / Max for Live device.

For more information please visit

03/16/ - NastyMono gets a guest appearance on the Moog Minitaur Video Review by Nick Batt at Sonic State


Our upcoming product the NastyMono has featured a guest appearance on the lastest Moog Minitaur Video Review by Nick Batt at Sonic State. The NastyMono is a Hybrid Feedback Controller and I/O Adapter for both the KORG MONOTRIBE and MONOTRON Series, also as shown at , it can be used with any Analog Synth that features an Audio Input and a Headphones Output for adding punch, gritty or extreme distortion to the Signal Path. It features a fixed passive LPF to clean up the Feedback Path, a 1/4" Aux Input and an Extra 1/4" Audio Output. Selling price will be $ USD, it is expected to be available by April

02/21/ - Nick Batt at Sonic State Reviews the MIDITRIBE I/O


Our friends at Sonic State did a very nice Video Review of the new MIDITRIBE I/O, our Pre-assembled MIDI IN and OUT Mod Kit for the KORG MONOTRIBE.

02/18/ - Amazing Machines Intros MIDITRIBE I/O - MIDI IN and OUT Interface for the KORG MONOTRIBE


Pre-assembled, no soldering, just plug and play!


What's new in the MIDITRIBE I/O:


- Added MIDI OUT functionality (Outputs MIDI Clock / The Synth Part

works as an arpeggiator running at 1/16, which responds to pitch

information recorded in each of the internal sequencer's 16 steps for

controlling external synths on MIDI Channel 1 / The Rhythm Part sends

trigger information to MIDI Channel 10)

- Control external synths using the Ribbon Controller for Note ON / OFF,

Expression Controller (CC 11) and Gate Time

- Send Continuous Controllers 1, 16, 80, 81, 82 and 83 to MIDI OUT

Channel 1

- Couples as a MIDI Clock to Sync Pulse or Sync Pulse to MIDI Clock

converter using the MONOTRIBE's built-in Sync I/O

- Added the best MIDI (Female DIN5) connectors available on the


- Added a Manufactured PCB

- New List Price of $ USD

- $ USD Upgrade Rebate for Previous Owners (Previous Owners

please contact us before placing orders)


We will start shipping by Thu, Feb 23 due to the Brazilian Carnival



MIDITRIBE I/O Pre-Order starts Sat, Feb



Once the MONOTRIBE OS was released, many customers came to

us asking if their MIDITRIBE would still work after the update, the answer

is yes, any MIDITRIBE Revision will work % with the MONOTRIBE

OS update and there is more, the MONOTRIBE OS brings us

two incredible new MIDI features:


1 - Velocity Sensitivity for the "Synth Part" (VCA Level)

2 - Control of the "VCA Level" using CC 7 (Vol) or CC 11 (Expression)

© - • Amazing Machines

All media, registered trademarks and logos are property of their respective owners

Amazing Machines Operating at an INSANE LEVEL ▶11


Videos amazing machines


Amazing Production Processing Methods, Modern Manufacturing Technology, Amazing Industrial Machines


You will also be interested:


164 165 166 167 168