Mercury hydraulic steering kit

Mercury hydraulic steering kit DEFAULT

Mercury Outboard Boat Hydraulic Steering Sports Wheel Pack

Description

NEED HELP TO DETERMINE THE CORRECT KIT TO PURCHASE? PLEASE PROVIDE YOUR OUTBOARD ENGINE MODEL / SERIAL NUMBER AND HORSEPOWER ON CONTACT FORM
Kit Includes:
Installation Instructions for fitting

Boat Steering Australia
BSA installation Hydraulic steering Instructions

BSA Bleeding the Hydraulic unit troubleshooting
• BSA helm pump 1000 PSI.
• BSA Series front mount cylinder to suit major brands of outboard engines.
• 2 x 6.4 metre semi-rigid nylon hose kit suits most makes on the market.
• 2 X High pressure adjustable hose fittings included for optional length adjustment.
• oil filler kit.
Steering wheel included – 3/4″ tapered shaft fits most steering wheels on the market.
BSA front mount steering offers unmatched comfort and control. The most popular outboard hydraulic system offers smooth, super efficient steering for today’s high performance hulls with single station outboards. 20% less effort at hard over than competitive brands. Ultra corrosion resistant materials are used throughout the hydraulic system.
The BSA Hydraulic System
High-horsepower/high-speed boating is here and steering systems must perform at maximum capacity. The BSA Hydraulic Steering System is designed to provide that extra margin of muscle when needed and easily handles Outboard, up to 50 feet.
System selection, installation and service is substantially simplified with just three major components – helm, cylinder and tube or hose. BSA has a comprehensive range of available cylinders to handle a variety of Outboards,These are suitable for both pleasure and commercial applications. Extra steering stations and/or autopilots are easily added.
Features:
• Easy to install
• Only three components: helm, cylinder & tube or hose
• Compact and attractive helm design
• Variety of helm mounting configurations
• Simple tube/hose fitting connections
• Clear, complete installation instructions
• Easy to fill and purge
• Engineered bleed fittings on the cylinders
• A helm and lock valve design that enhances air removal
• A no-mess filler device
• A filling and purging time of normally less than 30 minutes
• Easy to check for proper installation
• Easy purging check via filler device
• No searching for difficult-to-find air leaks
• Easy to turn
• Anti-friction piston points
• Designed to provide many years of service…
• Precision built
• Heavy-duty bearings instead of bushings
• All metal construction
• No corrosive materials exposed to marine environment
• Field replaceable helm and cylinder shaft seals
System Components
BSA hydraulic steering systems are simple and efficient. The basic system consists of three main components:
1. The Helm Unit
The BSA helm pump is an axial piston pump specifically designed for manual steering. It has a built-in lock valve to prevent the steering load from feeding back to the driver. The lock valve will not allow the rudder or drive unit to move until you move it with the steering wheel. The lock valve section of the helm also includes a relief valve. This relief valve provides over-pressure protection for mechanical components and hydraulic hoses and fittings.
2. The Cylinder
The most important differences between the variety of BSA steering systems available is the cylinder selection. The BSA system has a cylinder for most steering applications.
3. Hoses and Tubes
Required to provide a path for the fluid to flow under pressure from the helm pump to the cylinder.

Sours: https://bsasteering.com.au/products/mercury-outboard-boat-hydraulic-steering-sports-wheel-pack/
Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steer Kit 1 Evinrude E-Tec 250 HO Motor, 1 Ram

421-SA-82


Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Evinrude E-Tec 250 HO Motor powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steer Kit 1 Mercury 200, 225, 250, 300 XS Motor, 1 Ram

421-SA-74


Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Mercury XS powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Steer Kit 2 Mercury 200, 225, 250, 300 XS Motors, 2 Rams

Steer Kit 2 Mercury 200, 225, 250, 300 XS Motors, 2 Rams

421-SA-94


Dual External Hydraulic Steering For 2 Mercury XS Stern Drives

IMCO's external hydraulic steering for the Mercury XS has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Steer Kit 2 Mercury 300 X Motors, 2 Rams

Steer Kit 2 Mercury 300 X Motors, 2 Rams

421-SA-93


Dual External Hydraulic Steering For 2 Mercury 300 X Drives

IMCO's external hydraulic steering for the Mercury 300X has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit 1 Mercury 2.5 EFI

421-SA-71


Standard Single Ram Power Steering for Mercury 2.5 EFI

The IMCO Standard Single Ram Power Steering System is intended for Mercury 2.5 EFI powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. Kit includes Tilt pin, Steering Ram, Wing Plate Outside hoses and thru hulls.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit 1 Mercury 300 X

421-SA-73


Standard Single Ram Power Steering for Mercury 300 X

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 X powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit 2 Mercury 2.5 EFI

421-SA-91


Standard Dual Ram Power Steering for Dual Mercury 2.5 EFI

The IMCO Standard Dual Ram Power Steering System is intended for Dual Mercury 2.5 EFI powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Thru Hull Fittings for UFLEX Outboard Hydraulic Steering Kits

This Part has options, please click the button below to order.

Bulkhead Fitting Panel for UFLEX Outboard Hydraulic Steering Kits

623-R9 + Option(s)


This panel has two fittings that are used for feeding Uflex Outboard Hydraulic Lines through a bulkhead. Available in Black, White, or Chrome.  The fittings are 3/8" compression fittings on both sides. The standard 3/8" compression is equal to 9/16"-24 UNEF 2A thread.


HYCO Outboard Steering Kit

This Part has options, please click the button below to order.

HYCO Up to 150HP Outboard Steering Kit

623-HYCO + Option(s)


Hyco Front Mount Outboard System for 150hp and Less. Includes: UC94-OBF cylinder (Not suitable for HONDA®BF115 and BF130 engines and Mercury® Optimax TM75, 90, 115.) Available with Standard or Tilt Helm.

Featuring the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the UP20 helm the Hyco offers effortless steering with 5 turns lock to lock. And it is applicable to almost all 2 and 4 stoke outboards engines.

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil.
Steering Wheel, Hose and fittings are sold separately!

See Application Guide on Additional Info Tab to make sure you order the correct cylinder.


Mayfair Outboard Hydraulic Steering Ram

Mayfair Outboard Hydraulic Steering Ram

137-9521


  • For Mercury Outboards with Existing Wingplate
  • Replacement Ram Assembly
  • 9" Stroke Ram
  • (2) 16" SS Hoses, (2) Thru Hull Fittings, (2) Ram Fitting Included.


PROTECH Outboard Steering Kit

This Part has options, please click the button below to order.

PROTECH Up To 300HP Outboard Steering Kit

623-PROTECH + Option(s)


Protech Hydraulic Helm Steering, for application up to 300HP. Available with Standard or Tilt Helm

Larger horsepower applications require a more robust steering cylinder. The Uflex Protech cylinder is designed for single, dual and triple engine applications up to 300 hp per engine. Featuring heavy duty seals, 304 electro-polished link assemblies, and a carbon steel piston, it is built for the most demanding applications.

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil. Steering Wheel, Hose and fittings are sold separately!

See Application Guide on Additonal Info Tab to make sure you order the correct cylinder.


HYCO Outboard Steering Kit

This Part has options, please click the button below to order.

SILVERSTEER Up to 350HP Outboard Steering Kit

623-SILVERSTEER + Option(s)


SILVERSTEER Front Mount Outboard System for 350hp and Less. Includes: UC128-SVS cylinder. Available with Standard or Tilt Helm.

Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.

Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.

Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

  • Horsepower: Single engine, up to 350hp, dual engines, up to 600hp (total)
  • Helm: 7.3 cu in/120cc
  • Hose: 1,500psi
  • Turns Lock-to-Lock: 4.3
  • Included Equipment: UP28 F-SVS front mount helm pump, UC128-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
  • Steering Wheel Shaft: 3/4" tapered
  • Warranty: Two years

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil. Steering Wheel, Hose and Thru Hull fittings are sold separately!

See Application Guide on Additonal Info Tab to make sure you order the correct cylinder.


Single Engine Outside Steering Kit

This Part has options, please click the button below to order.

Single Engine Outside Steering Kit

139-1002976 + Option(s)


Single Engine Outside Steering Kit

Introducing the ultimate in high performance outboard steering. Another #1 innovative design. Zeiger's polished stainless steel outboard mounting plate system follows the Opti-Mac cowling design at the bottom of the power head. The unique three piece plate design requires a slot cut on the side of the cowling thus not exposing the lower power head exhaust section of the engine. Simply slot the cowling for the side mounted three bolt mounting plate, align with the one-piece plate for a professional installation. Enjoy a 100% full power steering helm by utilizing an electric power steering pump system. It's small, compact and light weight, easy to mount and electronically controlled.


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit Dual Mercury 300 R, Outside Only, No Tiebar

421-SA-75


Standard Dual Ram Power Steering for Mercury 300R, No Tie Bar, Outside Only

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 R powered recreational performance sport boats and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.



Twin Engine Outside Steering Kit

This Part has options, please click the button below to order.

Twin Engine Outside Steering Kit

139-1002912 + Option(s)


Twin Engine Outside Steering Kit

Introducing the ultimate in high performance outboard steering. Another #1 innovative design. Zeiger's polished stainless steel outboard mounting plate system follows the Opti-Mac cowling design at the bottom of the power head. The unique three piece plate design requires a slot cut on the side of the cowling thus not exposing the lower power head exhaust section of the engine. Simply slot the cowling for the side mounted three bolt mounting plate, align with the one-piece plate for a professional installation. Enjoy a 100% full power steering helm by utilizing an electric power steering pump system. It's small, compact and light weight, easy to mount and electronically controlled.


Sours: https://www.hardin-marine.com/c-1837-outboard-hydraulic-steering.aspx
  1. Watercolor unicorn clipart
  2. Android aviation apps 2017
  3. Gettysburg cat rescue
  4. Denton county rainfall
Mayfair Outboard Hydraulic Steering Ram

Mayfair Outboard Hydraulic Steering Ram

137-9521


  • For Mercury Outboards with Existing Wingplate
  • Replacement Ram Assembly
  • 9" Stroke Ram
  • (2) 16" SS Hoses, (2) Thru Hull Fittings, (2) Ram Fitting Included.


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit Dual Mercury 300 R, Outside Only, No Tiebar

421-SA-75


Standard Dual Ram Power Steering for Mercury 300R, No Tie Bar, Outside Only

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 R powered recreational performance sport boats and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


Single Engine Outside Steering Kit

This Part has options, please click the button below to order.

Single Engine Outside Steering Kit

139-1002976 + Option(s)


Single Engine Outside Steering Kit

Introducing the ultimate in high performance outboard steering. Another #1 innovative design. Zeiger's polished stainless steel outboard mounting plate system follows the Opti-Mac cowling design at the bottom of the power head. The unique three piece plate design requires a slot cut on the side of the cowling thus not exposing the lower power head exhaust section of the engine. Simply slot the cowling for the side mounted three bolt mounting plate, align with the one-piece plate for a professional installation. Enjoy a 100% full power steering helm by utilizing an electric power steering pump system. It's small, compact and light weight, easy to mount and electronically controlled.


Twin Engine Outside Steering Kit

This Part has options, please click the button below to order.

Twin Engine Outside Steering Kit

139-1002912 + Option(s)


Twin Engine Outside Steering Kit

Introducing the ultimate in high performance outboard steering. Another #1 innovative design. Zeiger's polished stainless steel outboard mounting plate system follows the Opti-Mac cowling design at the bottom of the power head. The unique three piece plate design requires a slot cut on the side of the cowling thus not exposing the lower power head exhaust section of the engine. Simply slot the cowling for the side mounted three bolt mounting plate, align with the one-piece plate for a professional installation. Enjoy a 100% full power steering helm by utilizing an electric power steering pump system. It's small, compact and light weight, easy to mount and electronically controlled.


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steer Kit 1 Evinrude E-Tec 250 HO Motor, 1 Ram

421-SA-82


Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Evinrude E-Tec 250 HO Motor powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steer Kit 1 Mercury 200, 225, 250, 300 XS Motor, 1 Ram

421-SA-74


Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Mercury XS powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit 1 Mercury 2.5 EFI

421-SA-71


Standard Single Ram Power Steering for Mercury 2.5 EFI

The IMCO Standard Single Ram Power Steering System is intended for Mercury 2.5 EFI powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. Kit includes Tilt pin, Steering Ram, Wing Plate Outside hoses and thru hulls.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit 1 Mercury 300 X

421-SA-73


Standard Single Ram Power Steering for Mercury 300 X

The IMCO Standard Single Ram Power Steering System is intended for Mercury 300 X powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Steer Kit 2 Mercury 200, 225, 250, 300 XS Motors, 2 Rams

Steer Kit 2 Mercury 200, 225, 250, 300 XS Motors, 2 Rams

421-SA-94


Dual External Hydraulic Steering For 2 Mercury XS Stern Drives

IMCO's external hydraulic steering for the Mercury XS has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Steer Kit 2 Mercury 300 X Motors, 2 Rams

Steer Kit 2 Mercury 300 X Motors, 2 Rams

421-SA-93


Dual External Hydraulic Steering For 2 Mercury 300 X Drives

IMCO's external hydraulic steering for the Mercury 300X has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


Standard Single Ram Power Steering

This Part has options, please click the button below to order.

Steering Kit 2 Mercury 2.5 EFI

421-SA-91


Standard Dual Ram Power Steering for Dual Mercury 2.5 EFI

The IMCO Standard Dual Ram Power Steering System is intended for Dual Mercury 2.5 EFI powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.


For Replacement Parts Click Here


HYCO Outboard Steering Kit

This Part has options, please click the button below to order.

HYCO Up to 150HP Outboard Steering Kit

623-HYCO + Option(s)


Hyco Front Mount Outboard System for 150hp and Less. Includes: UC94-OBF cylinder (Not suitable for HONDA®BF115 and BF130 engines and Mercury® Optimax TM75, 90, 115.) Available with Standard or Tilt Helm.

Featuring the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the UP20 helm the Hyco offers effortless steering with 5 turns lock to lock. And it is applicable to almost all 2 and 4 stoke outboards engines.

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil.
Steering Wheel, Hose and fittings are sold separately!

See Application Guide on Additional Info Tab to make sure you order the correct cylinder.


PROTECH Outboard Steering Kit

This Part has options, please click the button below to order.

PROTECH Up To 300HP Outboard Steering Kit

623-PROTECH + Option(s)


Protech Hydraulic Helm Steering, for application up to 300HP. Available with Standard or Tilt Helm

Larger horsepower applications require a more robust steering cylinder. The Uflex Protech cylinder is designed for single, dual and triple engine applications up to 300 hp per engine. Featuring heavy duty seals, 304 electro-polished link assemblies, and a carbon steel piston, it is built for the most demanding applications.

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil. Steering Wheel, Hose and fittings are sold separately!

See Application Guide on Additonal Info Tab to make sure you order the correct cylinder.


HYCO Outboard Steering Kit

This Part has options, please click the button below to order.

SILVERSTEER Up to 350HP Outboard Steering Kit

623-SILVERSTEER + Option(s)


SILVERSTEER Front Mount Outboard System for 350hp and Less. Includes: UC128-SVS cylinder. Available with Standard or Tilt Helm.

Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.

Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.

Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

  • Horsepower: Single engine, up to 350hp, dual engines, up to 600hp (total)
  • Helm: 7.3 cu in/120cc
  • Hose: 1,500psi
  • Turns Lock-to-Lock: 4.3
  • Included Equipment: UP28 F-SVS front mount helm pump, UC128-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
  • Steering Wheel Shaft: 3/4" tapered
  • Warranty: Two years

This kit includes Hydraulic Ram, Hydraulic Helm and 2 Quarts of Oil. Steering Wheel, Hose and Thru Hull fittings are sold separately!

See Application Guide on Additonal Info Tab to make sure you order the correct cylinder.


Thru Hull Fittings for UFLEX Outboard Hydraulic Steering Kits

This Part has options, please click the button below to order.

Bulkhead Fitting Panel for UFLEX Outboard Hydraulic Steering Kits

623-R9 + Option(s)


This panel has two fittings that are used for feeding Uflex Outboard Hydraulic Lines through a bulkhead. Available in Black, White, or Chrome.  The fittings are 3/8" compression fittings on both sides. The standard 3/8" compression is equal to 9/16"-24 UNEF 2A thread.



Sours: https://www.hardin-marine.com/c-2261-outboard-steering-systems.aspx
Sea Star Hydraulic Steering Bleeding and Refilling

.

Kit steering mercury hydraulic

.

Installing Hydraulic Steering - FS Boat Maintenance Seminar

.

You will also like:

.



170 171 172 173 174